|
|
> Home > Online Catalog > Basic Supplies
Dry-Air Spray Gun Filter | |
|  |
Quantity in Basket:
none
|
|
| | Downstream moisture will ruin your spray job.
Stop failure with our direct in-line filter at the
gun. |
Experienced users know that moisture cannot be present when
applying POR-15®... and even though your spraying system may
have moisture traps and filters, codensation may occur in the
hose downstream and ruin your paint job.
This great filter will absorb up to one (1) fluid ounce of
moisture and insure a perfectly dry system from start to
finish every time. It absorbs oil aerosols, condensed moisture,
and contaminants as small as 0.01 microns. It attaches directly
to the air inlet of your spray gun and, as air passes between
the filter's compressed layers, particles and moisture are
trapped.
This incredible filtration is accomplished at a true 30 CFM to
the spray gun, with minimal pressure drop at the optimum flow
rate. This disposable Spray Gun Filter is the answer to the
painter's worst nightmare - FISHEYE! But now, with the
introduction of High Volume, Low Pressure (HVLP) spray guns
using shop air, comes even more critical requirements for
clean, dry, oil free air supplying the paint gun.
Designed to remove the smallest contaminant particle,
oil-aerosol or drop of moisture to supply clean, dry, oil
free air to your spray gun. Users report reduced paint defects,
resulting in increased productivity with the ultimate final
finishes.
|
|